Supplier of Hydraulic and Pneumatic Jacking Systems for Jacking, Hoisting, Lifting & Moving. Tel: 866-522-5464

Rotate 1

Hydraulic and Mechanical Wedge Spreaders

We have the correct item for every type of job! 

RENTAL • SALES • SERVICE

Customized Hydraulic Spreading Systems available to rent or purchase.

HYDRAULIC SPREADER

FSH14 Hydraulic Industrial Spreader
Model : FSH14
Series : FS
Product Lines : Industrial Tools, Bolting Tools
  • Integrated wedge concept: friction-free, smooth, parallel wedge movememtn eliminates flange damage and spreading arm failure
  • Unique interlocking wedge design: no first step bending and risk of slipping out of joint
  • Requires very small access gap of only .24 in. (6mm)
  • Stepped spreader arm design: each step can spread under full load
  • Few moving parts means durability and low maintenance
  • Safety block SB1 and ratchet spanner SW22 included
FSM8 FSH14 dim IMP 1000
Maximum Operating Pressure (psi) 10,000
Maximum Spread (in) 3.16
Power Source Hydraulic
Maximum Spreading Force (ton) 14
Maximum Spreading Force (kN) 125
Tip Clearance (in) 0.24
Oil Capacity (in3) 4.76
Weight (lbs) 15.7

MECHANICAL SPREADER

FSM8 Mechanical Industrial Spreader
Model : FSM8
Series : FS
Product Lines : Industrial Tools, Bolting Tools
  • Integrated wedge concept: friction-free, smooth, parallel wedge movememtn eliminates flange damage and spreading arm failure
  • Unique interlocking wedge design: no first step bending and risk of slipping out of joint
  • Requires very small access gap of only .24 in. (6mm)
  • Stepped spreader arm design: each step can spread under full load
  • Few moving parts means durability and low maintenance
  • Safety block SB1 and ratchet spanner SW22 included
Customized Hydraulic Spreading Systems
synchwedge

In Stock

Spreaders ranging from half ton to sixteen tons.

Computer Controlled Spreader Systems to accurately monitor progress.

These spreaders use mechanical and hydraulic principles for separating flanges and can spread small, medium or large flange joints. Tool selection is made on the basis of the access gap between the flange faces, the flange size and the required scope of work.

 

WR 15 2
FSH14 Hydraulic Industrial Spreader man
FSM8 Mechanical Industrial Spreader tool

Hydraulic Industrial Spreaders

WR A GROUP cylinders

The FSH, FSM-Series parallel wedge spreaders offer controlled separation without bending or risk of slipping from the joint. The FS-Series spreaders are ideally suited to flanged joint applications.

A 92

A-92

Model : A92
Series : A – Spreader
Product Lines : Industrial Tools

Spreader

For Use with Cylinder Capacity (imperial tons) 1,0
Cylinder Capacity with Attachment (imperial tons) 1
Cylinder Series Compatibility RC
Compatible Products RC10, RC25
Dimension A (in)
2 1/4″ – 14 UN
Dimension B (in) 9.63
Dimension C (in) 1.38
Dimension D (in) 6.25
Hydraulic Wedgie 1

WR-15

Model : WR15
Series : WR
Product Lines : Industrial Tools, Bolting Tools
  • Single-acting, spring return
  • For use in very confined work areas
Maximum Operating Pressure (psi) 10,000
Maximum Spread (in) 11.50
Power Source – Hydraulic
Spreading Force (imperial tons) 0.75
Maximum Spreading Force (ton) 0,75
Maximum Spreading Force (kN) 6
Capacity (imperial tons) 0.75
Tip Clearance (in) 1.26
Cylinder Effective Area (in2) 2.25
Oil Capacity (in3) 3.91
Weight (lbs) 25
WR 5

WR-5

Model : WR5
Series : WR
Product Lines : Industrial Tools, Bolting Tools
  • Single-acting, spring return
  • For use in very confined work areas
Maximum Operating Pressure (psi) 10,000
Maximum Spread (in) 3.7
Power Source – Hydraulic
Spreading Force (imperial tons) 1.00
Maximum Spreading Force (ton) 1
Maximum Spreading Force (kN) 8,9
Capacity (imperial tons) 1.00
Tip Clearance (in) 0.50
Weight (lbs) 5

IMMEDIATE PICK UP AND DELIVERY!

Worldwide we will arrange for immediate delivery of hydraulic spreading equipment directly to your location and we will pick it up when you have finished using it.