Hydraulic And Mechanical Wedge Spreaders

We have the correct item for every type of job! 

RENTAL • SALES • SERVICE

Customized Hydraulic Spreading Systems Available to Rent or Purchase.

HYDRAULIC SPREADER

Model : FSH14
Series : FS
Product Lines : Industrial Tools, Bolting Tools
  • Integrated wedge concept: friction-free, smooth, parallel wedge movement eliminates flange damage and spreading arm failure
  • Unique interlocking wedge design: no first step bending and risk of slipping out of joint
  • Requires very small access gap of only .24 in. (6mm)
  • Stepped spreader arm design: each step can spread under full load
  • Few moving parts means durability and low maintenance
  • Safety block SB1 and ratchet spanner SW22 included

Maximum Operating Pressure (psi) 10,000
Maximum Spread (in) 3.16
Power Source Hydraulic
Maximum Spreading Force (ton) 14
Maximum Spreading Force (kN) 125
Tip Clearance (in) 0.24
Oil Capacity (3 cu in) 4.76
Weight (lbs) 15.7

MECHANICAL SPREADER

Model : FSM8
Series : FS
Product Lines : Industrial Tools, Bolting Tools
Integrated wedge concept: friction-free, smooth, parallel wedge movement eliminates flange damage and spreading arm failure
Unique interlocking wedge design: no first step bending and risk of slipping out of joint requires very small access gap of only .24 in. (6mm)

Stepped spreader arm design: each step can spread under full load
Few moving parts means durability and low maintenance
Safety block SB1 and ratchet spanner SW22 included

Customized Hydraulic Spreading Systems

In Stock

Spreaders ranging from half ton to sixteen tons.

Computer Controlled Spreader Systems to accurately monitor progress.

These spreaders use mechanical and hydraulic principles for separating flanges and can spread small, medium or large flange joints. Tool selection is made on the basis of the access gap between the flange faces, the flange size and the required scope of work.

 

Hydraulic Industrial Spreaders

The FSH, FSM-Series parallel wedge spreaders offer controlled separation without bending or risk of slipping from the joint. The FS-Series spreaders are ideally suited to flanged joint applications.

A-92

Model : A92

Series : A – Spreader
Product Lines : Industrial Tools Spreader

For Use with Cylinder Capacity (imperial tons) 1,0
Cylinder Capacity with Attachment (imperial tons) 1
Cylinder Series Compatibility RC
Compatible Products RC10, RC25
Dimension A (in)
2 1/4″ – 14 UN
Dimension B (in) 9.63
Dimension C (in) 1.38
Dimension D (in) 6.25

WR-15

Model: WR15

Series : WR
Product Lines : Industrial Tools, Bolting Tools
• Single-acting, spring return
• For use in very confined work areas
Maximum Operating Pressure (psi) 10,000
Maximum Spread (in) 11.50
Power Source – Hydraulic
Spreading Force (imperial tons) 0.75
Maximum Spreading Force (ton) 0,75
Maximum Spreading Force (kN) 6
Capacity (imperial tons) 0.75
Tip Clearance (in) 1.26
Cylinder Effective Area (in2) 2.25
Oil Capacity (3 cu in) 3.91
Weight (lbs) 25

WR-5

Model : WR5

Series : WR
Product Lines : Industrial Tools, Bolting Tools
Single-acting, spring return
For use in very confined work areas
Maximum Operating Pressure (psi) 10,000
Maximum Spread (in) 3.7
Power Source – Hydraulic
Spreading Force (imperial tons) 1.00
Maximum Spreading Force (ton) 1
Maximum Spreading Force (kN) 8,9
Capacity (imperial tons) 1.00
Tip Clearance (in) 0.50
Weight (lbs) 5

IMMEDIATE PICK UP AND DELIVERY!

Worldwide we will arrange for immediate delivery of hydraulic spreading equipment directly to your location and we will pick it up when you have finished using it.

WB Equipment Corp.